On the Investigation of Effective Factors on Higher Heating Value of Biodiesel: Robust Modeling and Data Assessments.

Higher heating value (HHV) is one of the properties of biomass fuels which is essential in investigating their special characteristics and potentialities. In this paper, various techniques based on Gaussian process regression (GPR) were utilized to assess this value for biomass fuels, including several kernel functions, i.e., exponential, Matern, rational quadratic, and squared exponential. An extensive databank was collected from literature. The findings were compared, and the results indicated that Exponential-based model was more accurate, with the coefficient of regression (R 2) of 0.961 and the mean relative error (% MRE) of 3.11 for total data. Compared to former models presented by previous researchers, the model proposed in this study showed a higher ability to predict output values. With various analyses, it can be concluded that the proposed method has a high rate of efficiency in assessing the HHV of various biomass.

Comprehensive Modeling in Predicting Biodiesel Density Using Gaussian Process Regression Approach.

In this study, four Gaussian process regression (GPR) approaches by various kernel functions have been proposed for the estimation of biodiesel density as the functions of pressure, temperature, molecular weight, and the normal melting point of fatty acid esters. Comparing the actual values with GPR outputs shows that these approaches have good accuracy, but the performance of the rational quadratic GPR model is better than others. In this GPR model, RMSE = 0.47, MSE = 0.22, MRE = 0.04, R 2 = 1, and STD is equal to 0.3. In addition, for the first time, this study shows that the effective parameters affect the biodiesel density. According to this analysis, it was shown that among the input parameters, pressure has the greatest effect on the target values with a relevancy factor of 0.59. This study can be used as a suitable and valuable work/tool for chemical and petroleum engineers who attempt environment protection and recovery improvement.

An insight into the estimation of drilling fluid density at HPHT condition using PSO-, ICA-, and GA-LSSVM strategies.

The present study evaluates the drilling fluid density of oil fields at enhanced temperatures and pressures. The main objective of this work is to introduce a set of modeling and experimental techniques for forecasting the drilling fluid density via various intelligent models. Three models were assessed, including PSO-LSSVM, ICA-LSSVM, and GA-LSSVM. The PSO-LSSVM technique outperformed the other models in light of the smallest deviation factor, reflecting the responses of the largest accuracy. The experimental and modeled regression diagrams of the coefficient of determination (R2) were plotted. In the GA-LSSVM approach, R2 was calculated to be 0.998, 0.996 and 0.996 for the training, testing and validation datasets, respectively. R2 was obtained to be 0.999, 0.999 and 0.998 for the training, testing and validation datasets, respectively, in the ICA-LSSVM approach. Finally, it was found to be 0.999, 0.999 and 0.999 for the training, testing and validation datasets in the PSO-LSSVM method, respectively. In addition, a sensitivity analysis was performed to explore the impacts of several variables. It was observed that the initial density had the largest impact on the drilling fluid density, yielding a 0.98 relevancy factor.